Wieder auf LagerEins von unseren Zielen ist es, um alles direkt aus dem Lager vorrätig zu haben. Jedoch besteht die Möglichkeit, dass ein Produkt vorübergehend ausverkauft ist. Auf dieser Seite finden Sie alle Produkte, die wieder neu auf Lager sind.
Eins von unseren Zielen ist es, um alles direkt aus dem Lager vorrätig zu haben. Jedoch besteht die Möglichkeit, dass ein Produkt vorübergehend ausverkauft ist. Auf dieser Seite finden Sie alle Produkte, die wieder neu auf Lager sind.
Elektrode Plasmabrenner
Geeignet für den Plasmabrenner PL141.
80 - 100A
Preis pro Stück
Anchor
- galvanised
- weight = 20kg
Solenoid 24V Flansch Cummins
Stop Relay
Stand für Strech und Stauchgeräte Suitable for stretcher and shrinker MSS12.
Ultraschallreiniger / Ultraschallgerät
Fluxon ultrasonic cleaners are extremely suitable for cleaning a variety of different materials.
By using ultrasonic vibrations, in combination with cleaning fluid, stuck dirt or production residues are easily removed.
Advantages:
Very efficient
Has a digital controller to guarantee a long service life with high precision
Requires little cleanser
Cleans very environmentally friendly
The ultrasonic cleaners are suitable for 3 different cleaning methods:
Normal cleaning: Only water is used for cleaning, temperatures < 50 degrees Celsius
Advanced cleaning: Add some cleaning drops, liquid soap or degreaser, but no acids!
Extensive cleaning: Removal of tarnish, carbon and rust from non-plated metals. Use specific cleansers suitable for ultrasonic cleaners.
Specifications:
tank capacity = 15L
ultrasonic power = 360W
heating power = 400W
cleaning frequency = 28kHz, 40kHz
time control = 1 - 99min
temperature control = 0 - 80 degrees Celsius
tank dimensions = 330 x 300 x 150mm
Gummiauflage Suitable for ATH Heinl, Hofmann and Falco lifts. - dimensions = 120 x 120 x 19mm - inner diameter = 104mm
Zugbolzen
Gewindegröße =
geeignet für die runde Blechlocher = 16mm / 20mm / 22mm / 22,5mm / 25mm / 26,2mm / 27,5mm
Reifenmontagepaste Schwarz 5L
Anchor - galvanised - weight = 600kg
Laderampe / Motorradrampe
This Torso lightweight ramp is suitable for loading motorcycles, scooters and the like on a trailer or in a bus. This makes it easy to transport vehicles. The aluminum plate is equipped with a anti-slip profile which provides extra grip.The ramp has the following features:
full aluminum design, lightweight ramp
anti-slip profile for extra grip
easy to store and transport
capacity = 500kg (1000kg per set)
length = 2m
track width = 21,5cm
material = aluminum
weight = 8,8kg/piece
Price per piece!
Werkbankhaken / Werkzeughaken
Dieser geschlossene Werkzeughaken in U-Form ist ideal zum organisierten Aufhängen von Werkzeugen, zur Verwendung mit folgenden Werkzeugwänden der Expert-Serie und Werkbänken:
Dieser Werkzeughaken ist ideal zum organisierten Aufhängen von Werkzeugen, zur Verwendung mit folgenden Werkzeugwänden der Expert-Serie und Werkbänken:
Werkzeugkiste / Anghangerkiste
This Toolbox4you storage box is made of aluminum and provided with a solid black coating. This makes the box extremely suitable for outdoor use in various weather conditions.
The box is equipped with a stainless steel lock at the front, so that materials are safely behind lock and key.
Thanks to the two sturdy handles on the sides of the box, it is easy to move.
dimensions = 760 x 335 x 245mm
inside dimensions = 710 x 285 x 240mm
material = 1.5mm fully welded aluminium checkerplate
black coat
splash proof
3'' stainless steel hinges
This window is suitable for the sand blasting cabinets SB11A, SB19A, SB22A, SB22AB, SB35A, SB42A en SB42AB.
Note: This is only the frame and not the window!
LED Balken This Fluxon LED spotlight has an "E" mark. This means that this light has been approved, on the basis of European regulations, to be carried on a vehicle. Light with an "E" quality mark may therefore be used on public roads. However, spotlights with an "E" quality mark may only be used outside the urban area. It is also not allowed to use high beam within the urban area. Therefore it is mandatory to connect this light separately from the normal light and make it possible to switch it on and off. Specifications: - nominal voltage = 12 / 24V - current draw (12/24V) = 7,1 / 3,5A - nominal power = 120W - raw lumens = 9600Lm - color temperature = 6000K - protection grade = IP67
- Including mounting kit.
Umlenkrolle Seilwinde
Dieser Torso Umlenkrolle eignet sich zum Verdoppeln des Kabels einer Winde. Dies ermöglicht es, beim Winden doppelt so viel Kraft zu realisieren.
Dieser Block ist auch mit einem Nippel zur Schmierung versehen.
Technische Spezifikationen:
Kapazität = 3600kg / 8000lbs
Außengröße der Riemenscheibe = 98mm
Innengröße der Riemenscheibe = 84mm
Kabeldurchmesser = 14mm
Lochdurchmesser = 53mm
Werkzeugwagen jumbo 496 Stück Werkzeuge Profi Individual drawer locking 1st drawers -910009 = 8pc srewdriver set -910020 = 8pc star tamp driver set -910021 = 8pc screwdriver set -210050 = 51pc power bit set --------------------------------------------------------------- -910040 = 43pc star assortment set -910033 = 12pc flex.one Gear Wrench 2nd drawer -910001 = 62pc 1/4" drive, socket wrench set -910003 = 24pc 3/8" drive, socket wrench set -910005 = 5pc 1/2" drive, accessory set -910006 = 21pc 1/2" drive, socket wrench set --------------------------------------------------------------- -910041 = 18pc 1/2" drive, eeep socket wrench set -910042 = 14pc 3/8" drive, deep socket wrench set 3rd drawer -910043 = 13pc 1/2" drive deep impact socket set -910044 = 11pc 1/2" drive impact socket set -910045 = 11pc 1/2" drive impact socket bit set -910007 = 11pc 1/2" drive socket bit set ------------------------------------------------------------- -910027 = 23pc ribe socket bit set -910039 = 26pc 3/8 drive socket bit set 4th drawers -910010 = 16pc combination wrench set -910035 = 5pc combinatiom wrenches set -910022 = 8pc flare nut wrench set -910011 = 11pc double open end wrench set ----------------------------------------------------------- -910018 = 7pc hinged socket wrench set -910023 = 3pc hinged socket wrench set 5th drawers -910012 = 8pc ring wrench, 75 degree offset -910036 = 4pc offset ring wrenches set -910013 = 2pc pliers Set -910014 = 3pc pliers Set ----------------------------------------------------------- -910015 = 5pc hammer chisel set -910019 = 13pc chisel punch set 6th drawer -910046 = 4pc long pliers set -910017 = 4pc Snap Ring Pliers set -910016 = 3pc cutting tools set -910049 = 4pc lager hook and pick set ------------------------------------------------------------ -910047 = 5 pc file set -910031 = 7pc measuring tool set 7th 8th drawers empty, free for use / storage
Konus Satz - suited for big rims (Iveco) - for machines with 40mm axle - 2 pieces
