Back in stockOne of our goals is to have everything directly available from our stock, however sometimes a product might be temporarily sold out. On this page, you can find all items, which are back in our stock.
One of our goals is to have everything directly available from our stock, however sometimes a product might be temporarily sold out. On this page, you can find all items, which are back in our stock.
Tube notcher
This Cowley notcher is suitable for thin-walled aluminum, steel and stainless steel pipes. It is used, among other things, for welding pipes and corner joints at an angle of 90 degrees.
Can be used both horizontally and vertically.
Technical specifications:
sizes = 38 - 51mm (1 1/2" - 2")
max. pipe thickness = 3mm
length lever = 920mm
Rubber pad / rubber support pad Suitable for ATH Heinl, Hofmann and Falco lifts. - dimensions = 120 x 120 x 19mm - inner diameter = 104mm
Anchor
- galvanised
- weight = 20kg
- weight = 30kg
Sanding paper 6'' P320 velcro with holes 5pcs
Hydraulic hand pump Hydraulic operated pump to drive crimping head, cutting heads and punching head. Including 2M high pressure hose and couple plug. - max. output pressure: low pressure = 20 bar / 2MPa high pressure = 700 bar / 70MPa - output of the oil: low pressure = 13cc / 13ml high pressure = 2.3cc / 2.3ml - capacity of the oil = 2000ml
Oil drain pan with spout This oil drain pan is suitable for the draining of oil and other liquids at various activities. Because the edge of the pan is folded inwards, the oil does not go over the edge when the pan is emptied. The volume of the pan is 4 gallon (15 liters).
Snatch block
This Torso snatch block is suitable for doubling the cable of a winch. This makes it possible to realize twice as much force during winching.
This block is also provided with a nipple for lubrication.
capacity = 3600kg / 8000lbs
pulley external size = 98mm
pulley internal size = 84mm
cable diameter = 14mm
diameter hole = 53mm
Jobsite box / tool chest / trailer box checkerplate
This Toolbox4you storage box is made of aluminum and provided with a solid black coating. This makes the box extremely suitable for outdoor use in various weather conditions.
The box is equipped with a stainless steel lock at the front, so that materials are safely behind lock and key.
Thanks to the two sturdy handles on the sides of the box, it is easy to move.
dimensions = 760 x 335 x 245mm
inside dimensions = 710 x 285 x 240mm
material = 1.5mm fully welded aluminium checkerplate
black coat
splash proof
3'' stainless steel hinges
Welding electrodes stainless steel
These INE 308 stainless steel welding electrodes are suitable for connecting equal and unequally types of stainless steel themselves, but also for stainless steel with unalloyed and low alloyed steel (mild steel). They are stainless steel welding electrodes in accordance with AWS E308L-17. For connections between stainless steel and normal steel results in a weld seam which has a high alloy and a high degree of corrosion resistance.
The slag is easy to remove.
Furthermore, the welding electrodes are suitable for all welding positions.
- brand = INE
- thickness = 2,0mm
- length = 300mm
- suitable for = stainless steel
- amount = 12pcs
Standards:
AWS A 5.4: E308L-17
EN ISO 3581-A: E 19 9 LR
This Fluxon very extensive power distributor can easily be mounted on the wall and is ideal for using in workshop and garages.
Input:
CEE plug 63A / 5-pole / 400V
Output:
3x CEE socket 16A / 5-pole / 400V
3x CEE socket 32A / 5-pole / 400V
1x CEE socket 63A / 5-pole / 400V
8x socket (DIN49440) 16A / 230V
This window is suitable for the sand blasting cabinets SB11A, SB19A, SB22A, SB22AB, SB35A, SB42A and SB42AB.
Note: This is only the frame and not the window!
Steel cable
- length = 20m
- diameter = 8,3mm
Solenoid 24V heavy foot double winding inside switch
Parts cleaner / parts washer / mobile biological degreaser / sink / degreasing fountain
The Ecowave PWB40 professional parts washer cleans parts without chemicals, protecting both the user and the environment.This new generation of parts cleaner works with a cleaning solution based on a natural regeneration, in which oxygen and micro-organisms are used to destroy pollutants. This process ensures cost effective and efficient maintenance.The cleaner is particularly suitable for cleaning / degreasing parts that are contaminated with grease, oil and other residues.
The PWB40 Ecowave move is very mobile because of the 4 PU swivel wheels, 2 with brakes, and therefore suitable for different types of workshops and garages. The cleaner must be connected to power until the indicator light comes on, which means that the cleaning bath has reached an optimal temperature. The device is then independent and can move freely within the workshop. This makes it easy to clean every object at different locations. The pump and blow gun for drying operate on compressed air.The parts washer is also equipped with an integrated soaking tray. Here you can put a part to soak for a longer period of time.With a capacity of 40 liters, the container is suitable for medium-sized parts.
The parts cleaner also has the following strong features:
Mobile parts washer
Ergonomic design
50µm filter to maintain cleaning performance
Regulated heating system at 38 degrees Celsius
Safety thermostat for protection against overheating
Blow gun with compressed air connection for drying
Powerful degreaser brush
Easy to maintain
Simple control panel: one switch
Convenient handle for movement
tank capacity = 40L
soaking area = 4L
soaking area dimensions = 240 x 220 x 80mm
working area dimensions = 550 x 430 x 150mm
pump flow = adjustable from 0 to 6L/min
heating power = 2kW
electric consumption = 150W
load capacity = 30kg
heating process from 15 to 38 degrees Celsius = at 20L about 15min.
composition = HDPE
tool holder = interchangeable brush
filtration = filter bag polypropylene 50µm
power supply = 230V = 2kW (9A)
LED light bar This Fluxon LED spotlight has an "E" mark. This means that this light has been approved, on the basis of European regulations, to be carried on a vehicle. Light with an "E" quality mark may therefore be used on public roads. However, spotlights with an "E" quality mark may only be used outside the urban area. It is also not allowed to use high beam within the urban area. Therefore it is mandatory to connect this light separately from the normal light and make it possible to switch it on and off. Specifications: - nominal voltage = 12 / 24V - current draw (12/24V) = 7,1 / 3,5A - nominal power = 120W - raw lumens = 9600Lm - color temperature = 6000K - protection grade = IP67
- Including mounting kit.
Self-centering three-jaw chuck
The metal workpiece is clamped using this chuck. The chuck is self-centering, so the claws are tightened all three at the same time. It is important that the material has a round, triangular or hexagonal profile.
diameter = 160mm
cylindrical fitting edge
comes with inside and outside set of claws
Pallet truck 1000kg 115cm extra low
This Pallet truck from Mammuth has an extra low minimum lifting height of only 35mm wich makes this pallet truck ideal for stone pallets and other applications where clearance is limited. Meanwhile, the maximum lifting height of 100mm and 1150 mm fork length ensure that you can move your load from one place to another with ease.
With tandem front rollers, this pallet truck is easy to maneuver and can handle turns and corners with ease. The steel hydraulic pump and polyurethane wheels ensure that this pallet truck is both durable and easy to use.
Grinding wheel KSM Provided with a special top layer. Hard, preferably for edge-grinding, or soft, for surface treatment. High stock removal. - diameter = 125mm - thickness = 7,0mm - bore = 22,23mm - V27
Four pole lift / alignment lift / four column lift / service lift / car lift / runway lift
Cascos car lifts are from 100% European production. Cascos has more than 50 years of experience in vehicle lifts, which results in a very reliable and extremely strong end product.At Cascos lifts, three key words are central, namely: Reliability, functionality and safety.
The robust construction of the lifts and the high quality of the components ensure high reliabilty and low maintenance costs.With a very low minimum ramp height and a maximum lifting height of 2000mm, these lifts are very versatile and suitable for cars, buses and 4x4 vehicles.The lifts are equipped with a safety indicator and have both a mechanical and a pneumatic protection.
Furthermore, the Cascos four pole lifts have a number of very thoughtful features:
Double T-profiles: Runways reinforced with double T-welded steel beams. These are virtually impossible to deform, withstand the load better over time and ensure that the runway is perfectly flat, ideal for very precise work.
Extra safety: Cascos gives priority to safety above all and has developed a double safety system for all columns, namely:Mechanical safety: by means of a safety bar.Pneumatic safety: by means of safety ladders.
Leveling alarm: Cascos lifts have an indicator light that warns if the runways are poorly leveled and ensures that the cylinder works in perfect conditions, which ensures a longer service life.
Hydraulic cylinders: One by one produced and tested in the factory.
Convenience and efficiency:Manual lowering valves to lower the lift in event of a power failure or malfunction.Adjustable lifting timer that can speed up the lowering, depending on the load volume.
Thermal protection: Electric motors have thermal protection against overheating.
For Cascos four post lifts, less installation space is required and a larger working surface is available, which makes the lift unique in its kind.
This alignment model four column lift has a capacity of 4 tons and has the following features:
Long alignment runways of 4,8 meters long and 630mm wide.
A drive width / distance between the columns of no less than 3 meters. This makes the lift very suitable for alignment and ensures an ideal working space at the vehicle.
Wide runways of 630mm, suitable for working with wider tires.
With a minimum ramp height of only 180mm, this lift is the lowest alignment lift on the market. Due to the low ramp height the ramps are shorter, making the lift suitable for low vehicles, such as sports cars.
Specifications:
capacity = 4000kg
voltage = 230-400V / 3 phase
motor power = 3kW
minimum drive height = 180mm
maximum lifting height = 2000mm
length of the runways = 4800mm
width of the runways = 630mm
distance between the runways = 740 - 990mm
drive width / distance between the columns = 3000mm
height of the columns = 2410mm
lifting time = 40 seconds
electro-hydraulic
Note: The price for this lift does not include the delivery and placement of the lift. Extended guarantees only apply in combination with a Spoods installation / mainenance contract. For more information, contact one of our employees.The presence of a forklift truck is necessary to unload the lift!