This Falco Sollevatori double scissor lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.Equipped with no less than four hydraulic cylinders (two per platform), this lift has a master-slave lifting system and also a locking system. This means that the lift is safe in any position and does not have to be lowered before work on the car can be done. It is also not necessary to first raise the lift to get out of the locking system, making the lift much easier to use and suitable for more applications than mechanically locked lifts.Thanks to its robust construction and thoughtful design, this double scissor lift is standard equipped with the following convenient features:
total platform length of 2030mm
master-slave hydraulic system
electro-hydraulic lift with 4 cylinders
automatic venting through vent button
low profile with minimum lifting height of 117mm
automatic synchronization
automatic overload protection
control valve for controlling the speed when dropping
limit sensor for limiting the maximum lifting height and the minimum safety height
deadman operation when lifting and lowering
foot protection including acoustic protection signal
Dutch manual including maintenance protocol and CE certificate 2006/42/EG
homologated and certified product according to EN1493:2010
This Falco Sollevatori wheel-free double scissors lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.This built-in double scissor lift model is accessible all around and suitable for many vehicles, including extra low cars. Because of the extendable platforms, the lift is also suitable for small vans.Thanks to its robust construction and thoughtful design, the scissors lift is standard equipped with the following convenient features:
platform length = 1540mm, extendable to 1745mm
electro-hydraulic double transpump
equipped with 2 heavy hydraulic cylinders
automatic synchronization through sensors
pneumatic locking made of high-quality material
complies with the NEN-EN1493 safety standard
fully automatic double scissor lift / scissor bridge / scissor lift / scissor liftThis Falco Sollevatori double scissor lift is of high quality and extremely suitable for professional use. At Falco lift bridges, quality and finish come first.
This alignment model is equipped with a bridge jack, turntables and long rear wheel plates. With the aid of the bridge jack, wheel-free lifting is possible up to a height of 450 mm above the roadways.
Due to the long carriageways of 4.8m, the bridge is suitable for small and large passenger cars, buses and heavier commercial vehicles.
Thanks to its robust construction and well thought-out design, this double scissor bridge is equipped with the following handy features as standard:
Technical specifications:
Vollautomatische Scherenhebebühne / Scherenhebebühne / Doppelscherenbrücke / Autolift / Autoliftbrücke / Scherenbrücke
This Falco Sollevatori double scissors lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.Equipped with no less than four hydraulic cylinders (two per platform), this lift has a master-slave lifting system. This means that the lift is safe in any position and does not have to be lowered before work on the car can be done. It is also not necessary to first raise the lift to get out of the locking system, making the lift much easier to use and suitable for more applications than mechanically locked lifts.Thanks to its robust construction and thoughtful design, this double scissor lift is standard equipped with the following convenient features:
Erweiterung / Frontblende This extension provides a longer motorcycle lift and is suitable for the MLP100KE. In combination with the widening set, the lift is also suitable for trikes. - length panel = 550mm - width panel = 800mm
Falco Hydrauliköl CH32 - capacity = 20L Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 HLP.
Falco Hydrauliköl CH46 - capacity = 20L Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 3, HVLP.
Falco Hydrauliköl CH32 - content = 5L Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 HLP.
Gummiauflage
Diese Falco Sollevatori Gummiauflage wird zum Anheben eines Tesla 3 Modells verwendet und ist für Garagenwagenheber und Hebebühnen geeignet. Das Gummiauflage lässt sich einfach auf der Hebefläche platzieren und hat die richtige Aufnahme für einen Tesla 3. Das bedeutet, dass keine weiteren Einstellungen nötig sind, um diese Fahrzeuge anzuheben.
Durchmesser = 75mm
Durchmesser Aufnahmepunkt = 26mm
Lift Rampe / Autorampe
Dieses Rampenset ist ideal für den Einsatz bei niedrigen Autos oder auf Hebebühnen, bei denen die Absorption zu hoch ist. Die Rampe besteht aus Gummigranulat, ist extrem stabil, verschiebt sich nicht und muss daher nicht befestigt werden.
Kann auch mit zweisäuligen Hebebühnen verwendet werden, deren Aufnahmeteller zu hoch sind.
Technische Spezifikationen:
Abmessungen = 1000 x 500 x 50mm
Material = Gummigranulat
2 Stücke
Gummiauflage Suitable for Ravaglioli lifts. - dimensions = 100 x 100 x 21mm - inner diameter = 80mm
Gummiauflage Suitable for Falco lifts. - dimensions = 119 x 119 x 33mm - inner diameter = 108mm
Gummiauflage Suitable for ATH Heinl, Hofmann and Falco lifts. - dimensions = 120 x 120 x 19mm - inner diameter = 104mm
Suitable for Ravaglioli lifts.
- dimensions = 125 x 125 x 26mm
- inner diameter = 104mm
Gummiauflage / Gummiblock universell Suitable for all scissor lifts. - dimensions = 160 x 120 x 120mm
Gummiauflage / Gummiblock universell Suitable for all scissor lifts. - dimensions = 160 x 120 x 20mm
Gummiauflage / Gummiblock universell Suitable for all scissor lifts. - dimensions = 160 x 120 x 40mm
Gummiauflage / Gummiblock universellSuitable for all scissor lifts.- dimensions = 160 x 120 x 60mm
