Double scissor lift alignment 4500kg 400V [VL9245ALL] Double scissor lift alignment 4500kg 400V
mm mm mm Kg

fully automatic double scissor lift / scissor bridge / scissor lift / scissor lift
This Falco Sollevatori double scissor lift is of high quality and extremely suitable for professional use. At Falco lift bridges, quality and finish come first.

This alignment model is equipped with a bridge jack, turntables and long rear wheel plates. With the aid of the bridge jack, wheel-free lifting is possible up to a height of 450 mm above the roadways.

Due to the long carriageways of 4.8m, the bridge is suitable for small and large passenger cars, buses and heavier commercial vehicles.

Thanks to its robust construction and well thought-out design, this double scissor bridge is equipped with the following handy features as standard:

  • Long lanes of 4.8 meters
  • Bridge jack for wheel-free lifting with a lifting range from 65 to 450mm
  • Roadways with built-in turntables and rear wheel plates
  • Electric Hydraulic Double Transpump
  • Equipped with four powerful hydraulic cylinders
  • Automatic venting by means of vent button
  • Automatic sync
  • Automatic overload protection
  • Ramps with anti-slip profile
  • Control valve for controlling the speed when descending
  • Limit sensors for limiting the maximum lift height and the minimum safety height
  • Dead mans operation when lifting and lowering
  • Foot protection incl. acoustic safety signal
  • Dutch manual incl. maintenance protocol and CE certificate 2006/42/EG
  • Complies with the NEN-EN1493 safety standard

Technical specifications:

  • capacity = 4500kg 
  • minimum ramp height = 240mm
  • maximum lifting height = 1800mm (2250mm including bridge jack)
  • length of lanes = 4800mm
  • lane width = 600mm
  • lifting range bridge jack = 65 - 450mm
  • reach bridge jack lifting arms = 1450 - 1900mm
  • voltage = 400V
  • motor power = 3kW
Lifts / Crosslifts Falco Sollevatori VL9245ALL 8720028101412
€ 10,285.00 Incl. VAT https://schema.org/InStock
€ 10,285.00 10285.0 EUR
Double scissor lift in-ground 3000kg 400V [VL7330] Double scissor lift in-ground 3000kg 400V
mm mm mm Kg

Fully automatic scissor lift / built-in lift

This Falco Sollevatori wheel-free double scissors lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.

This built-in double scissors lift model is accessible all around and suitable for many vehicles, including extra low cars. Because of the extendable platforms, the lift is also suitable for small vans.
Thanks to its robust construction and thoughtful design, the scissors lift is standard equipped with the following convenient features:

  • platform length = 1540mm, extendable to 1745mm

  • electro-hydraulic double transpump

  • equipped with 2 heavy hydraulic cylinders

  • automatic venting through vent button

  • automatic synchronization

  • automatic overload protection

  • pneumatic unlocking made of high-quality material

  • control valve for controlling the speed when dropping

  • limit sensor for limiting the maximum lifting height and the minimum safety height

  • deadman operation when lifting and lowering

  • foot protection including acoustic protection signal

  • Dutch manual including maintenance protocol and CE certificate 2006/42/EG

  • complies with the NEN-EN1493 safety standard

Lifts / Crosslifts Falco Sollevatori VL7330 8720028070404
€ 3,539.25 Incl. VAT https://schema.org/InStock
€ 3,539.25 3539.25 EUR
Double scissor lift master-slave 3000kg 400V [VL7230A] Double scissor lift master-slave 3000kg 400V
mm mm mm Kg

Fully automatic scissor lift / scissor lift

This Falco Sollevatori double scissors lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.
Equipped with no less than four hydraulic cylinders (two per platform), this lift has a master-slave lifting system and also a locking system. This means that the lift is safe in any position and does not have to be lowered before work on the car can be done. It is also not necessary to first raise the lift to get out of the locking system, making the lift much easier to use and suitable for more applications than mechanically locked lifts.

Thanks to its robust construction and thoughtful design, this double scissor lift is standard equipped with the following convenient features:

  • total platform length of 2030mm

  • master-slave hydraulic system

  • electro-hydraulic lift with 4 cylinders

  • automatic venting through vent button

  • low profile with minimum lifting height of 117mm

  • automatic synchronization

  • automatic overload protection

  • control valve for controlling the speed when dropping

  • limit sensor for limiting the maximum lifting height and the minimum safety height

  • deadman operation when lifting and lowering

  • foot protection including acoustic protection signal

  • Dutch manual including maintenance protocol and CE certificate 2006/42/EG

  • homologated and certified product according to EN1493:2010

Lifts / Crosslifts Falco Sollevatori VL7230A 8720028070411
€ 3,811.50 Incl. VAT https://schema.org/SoldOut
€ 3,811.50 3811.5 EUR
Double scissor lift master-slave 3500kg 400V [VL8235A] Double scissor lift master-slave 3500kg 400V
mm mm mm Kg

fully automatic scissor lift / scissor lift / double scissor bridge / auto lift / auto lift bridge / scissor bridge
This Falco Sollevatori double scissors lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.
Equipped with no less than four hydraulic cylinders (two per platform), this lift has a master-slave lifting system. This means that the lift is safe in any position and does not have to be lowered before work on the car can be done. It is also not necessary to first raise the lift to get out of the locking system, making the lift much easier to use and suitable for more applications than mechanically locked lifts.
Thanks to its robust construction and thoughtful design, this double scissor lift is standard equipped with the following convenient features:

  • total platform length of 2042mm
  • master-slave hydraulic system
  • electro-hydraulic lift with 4 cylinders
  • automatic air bleeding function
  • photocell for safety and platform synchronisation
  • low profile with minimum lifting height of 110mm
  • automatic synchronisation
  • automatic overload protection
  • control valve for controlling the speed when dropping
  • limit sensor for limiting the maximum lifting height and the minimum safety height
  • deadman operation when lifting and lowering
  • foot protection including acoustic protection signal
  • deliverd incl 4pcs 25mm lifting blocks and 4pcs 65mm lifting blocks
  • Dutch manual including maintenance protocol and CE certificate 2006/42/EG
  • homologated and certified product according to EN1493:2010
Lifts / Crosslifts Falco Sollevatori VL8235A 8720028101399
€ 4,537.50 Incl. VAT https://schema.org/SoldOut
€ 4,537.50 4537.5 EUR
Extension for motorcycle lift MLP100KE [FEP2425] Extension for motorcycle lift MLP100KE
mm mm mm Kg

Extension / front panel

This extension provides a longer motorcycle lift and is suitable for the MLP100KE.
In combination with the widening set, the lift is also suitable for trikes.

Motorcycle equipment / Motorcycle lifts Falco Sollevatori FEP2425 8720028046119
€ 96.80 Incl. VAT https://schema.org/InStock
€ 96.80 96.8 EUR
Falco hydraulic oil 20L CH32 [OCH32V20] Falco hydraulic oil 20L CH32
mm mm mm Kg

Falco hydraulic oil CH32

- capacity = 20L

Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 HLP.

Shop equipment / Fluid distribution / Oil Falco Sollevatori OCH32V20 8720028053711
€ 105.88 Incl. VAT https://schema.org/InStock
€ 105.88 105.88 EUR
Falco hydraulic oil 20L CH46V [OCH46V20] Falco hydraulic oil 20L CH46V
mm mm mm Kg

Falco hydraulic oil CH46

- capacity = 20L

Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 3, HVLP.

Shop equipment / Fluid distribution / Oil Falco Sollevatori OCH46V20 8720028077984
€ 114.95 Incl. VAT https://schema.org/InStock
€ 114.95 114.95 EUR
Falco hydraulic oil 5L CH32V [OCH32V] Falco hydraulic oil 5L CH32V
mm mm mm Kg

Falco hydraulic oil CH32

- content = 5L

Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 HLP.

Shop equipment / Fluid distribution / Oil Falco Sollevatori OCH32V 8720028050079
€ 34.49 Incl. VAT https://schema.org/InStock
€ 34.49 34.49 EUR
Falco hydraulic oil 5L CH46V [OCH46V] Falco hydraulic oil 5L CH46V
mm mm mm Kg

Falco hydraulic oil

- capacity = 5L

Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 3, HVLP.

Shop equipment / Fluid distribution / Oil Falco Sollevatori OCH46V 8720028077991
€ 32.07 Incl. VAT https://schema.org/InStock
€ 32.07 32.07 EUR
Four post lift 4000kg 4.5m Centurion [VL4K400V] Four post lift 4000kg 4.5m Centurion
mm mm mm Kg

four post lift / alignment lift / four column lift / service lift / car lift / runway lift
This Falco Sollevatori four column lift bridge is of high quality and extremely suitable for professional use. At Falco lift bridges, quality and finish come first.
This 4 column lift bridge has the pump unit at the top of the column to save space. The model has a double locking system, which guarantees the safety of persons and equipment.
Thanks to its robust construction and well thought-out design, this 4-column lift bridge is equipped with the following handy features as standard:

  • Pneumatic central unlocking
  • Produced according to NEN 1493, suitable for APK
  • Adjustable driving lanes
  • Foot protection by acoustic signal
  • Including LED lighting
  • Rail for jacking beam installation
Lifts / Four post lifts Falco Sollevatori VL4K400V 8720028101436
€ 4,658.50 Incl. VAT https://schema.org/SoldOut
€ 4,658.50 4658.5 EUR
Installation on location [INSTALVL] Installation on location
mm mm mm Kg

No time for installation?

Our professional installation team is specialized in the installation of Falco lifts!

Your bridge will be installed in a correct way.
The team thinks along with you about the position and placement of the lift.

For the above price is our installation team within a radius of 100km on site including 3 hours of labor for installation.

For the extended activities which are not included, there will be a hourly rate of € 75,00 excl. VAT.
For distances beyond the radius of 100km, we will charge 1,00 euro per kilometer.

Note!
The surface must at least meet the following requirements:
- concrete strength C20 - C25 250kg/com
- 200mm thickness
- newly poured concrete needs to cure for 28 days
Ask for the manual for more information about the surface requirements.

Transport of the lift is not included and depends on the unloading facilities.
Consult us first to make a suitable appointment for this.

Lifts / Crosslifts Falco Sollevatori INSTALVL 8720028071586
€ 1,119.25 Incl. VAT https://schema.org/SoldOut
€ 1,119.25 1119.25 EUR
Midrise scissor lift 3000kg 230V [VL75F230B] Midrise scissor lift 3000kg 230V
mm mm mm Kg

Fully automatic car bridge / cleaning bridge / scissor bridge / scissor lift / scissor lift bridge

This Falco tire bridge focuses on efficiency and ease of use. Thanks to the Sync safety system, it always drops synchronously. The bridge is equipped with an acoustic signal and a rail is fitted at the bottom for foot protection. The lanes are made of wear-resistant tear plate over the entire length. The stable solid design is easy to use anywhere on a straight surface and also includes mounting holes for fixed installation. It can be used both mobile and fixed. The bridge is supplied as standard including a wheel set, which makes it easy to move the bridge and allows you to make optimum use of your workshop.

Characteristics:

  • Extra low ramp height of 110mm

  • Mobile tire bridge

  • Powerful hydraulic cylinders

  • Fully automated electric safety interlock

  • Foot protection incl. acoustic safety signal

  • Start elevator

  • Adjustable ramp / extension piece

  • Foot protection switch

  • Emergency lowering valve

  • Incl. Wheel set, plug and rubber support blocks

lock = automatic

Lifts / Crosslifts Falco Sollevatori VL75F230B 8720028097678
€ 2,722.50 Incl. VAT https://schema.org/InStock
€ 2,722.50 2722.5 EUR
Midrise scissor lift 3000kg 230V [VL30F230B] Midrise scissor lift 3000kg 230V
mm mm mm Kg

Fully automatic scissor lift / car cleaning lift / scissor lift

Thanks to the thoughtful design of Falco lifts, you save time and effort. The focus is on ease of use and efficient work flow. The different models are developed for various applications.
Thanks to its stable solid design, this bestseller scissor lift is easy to place on a straight surface and installation is not necessary due to the sturdy construction. Every lift comes with a wheel set, making it easy to move the lift and therefore use your space in the workplace optimally.

Features:

  • extra low ramp height of 100mm

  • mobile scissors lift

  • powerful hydraulic cylinders

  • fully automated electrical safety lock

  • foot protection by acoustic security signal

  • start lift

  • adjustable ramp extension

  • foot safety switch

  • manual emergency valve, lowering also possible during power failure

  • custom galvanised rack

  • european grease nipples

  • incl. wheelset, plug and rubber support blocks

Technical specifications:

  • capcity = 3000kg

  • voltage = 230V

  • motor power = 2,2kW

  • min. lifting height = 100mm

  • max. lifting height = 990mm

  • locking system = automatically

  • platform size = 2000 x 460mm

  • fixed platform size = 1400 x 460mm

  • weight = 540kg

  • oil capacity = 5L (not included!)

All of Falco's car lifts comply with the NEN-EN1493 safety standard and are supplied with a Dutch manual including maintenance protocol and CE certificate 2006/42/EC.

Lifts / Crosslifts Falco Sollevatori VL30F230B 8720028070039
€ 2,359.50 Incl. VAT https://schema.org/SoldOut
€ 2,359.50 2359.5 EUR
Midrise scissor lift master-slave 3200kg 400V [VL7532B] Midrise scissor lift master-slave 3200kg 400V
mm mm mm Kg

Fully automatic scissor lift / car cleaning lift / scissor lift

This Falco Sollevatori single scissor lift is of high quality and suitable for professional use. With Falco lifts, quality and finishing go first.
Equipped with no less than four hydraulic cylinders (two per platform), this lift has a master-slave lifting system and also a locking system. This means that the lift is safe in any position and does not have to be lowered before work on the car can be done. It is also not necessary to first raise the lift to get out of the locking system, making the lift much easier to use and suitable for more applications than mechanically locked lifts.

Thanks to its robust construction and thoughtful design, this single scissor lift is standard equipped with the following useful features:

  • platform length = 1460mm

  • total length including ramps = 1995mm

  • master-slave hydraulic system

  • electrical hydraulic double pump

  • equipped with 4 heavy hydraulic cylinders

  • 8 hydraulic parachute valves for optimum safety

  • automatic venting by means of venting button

  • hydraulic synchronization

  • photocell safety between the 2 platforms

  • automatic overload protection

  • control valve for controlling the speed when lowering

  • limit sensors for limiting the maximum lift height and the minimum safety height

  • dead man's operation when lifting and lowering

  • foot protection including acoustic safety signal

  • adjustable distance between scissor platforms to your own liking

  • Dutch manual including maintenance protocol and CE certificate 2006/42/EC

  • meets the NEN-EN1493 safety standard

Lifts / Crosslifts Falco Sollevatori VL7532B 8720028046843
€ 3,146.00 Incl. VAT https://schema.org/SoldOut
€ 3,146.00 3146.0 EUR
Midrise scissor lift TwinX 3500kg 230V [VL35B230M] Midrise scissor lift TwinX 3500kg 230V
mm mm mm Kg

Car bridge / cleaning bridge / scissor bridge / scissor lift / scissor lift bridge 

Thanks to the well-considered design of the Falco bridges, you save time and effort. The focus is on ease of use and an efficient work flow. Thanks to the stable solid design, the lift is easy to place on a straight surface. Equipped with no less than four hydraulic cylinders (two per platform), this lift has a TwinX lifting system. As a result, the bridge is safe in every position and it does not have to be lowered before work can be carried out on the car. Also, there is no need to raise the bridge first to release it from the lock, making the bridge much more convenient to use and suitable for more applications than mechanically locked bridges. Each bridge is supplied as standard with a wheel set, which makes it easy to move the bridge and allows you to make optimum use of your workshop. The bridge is especially suitable for large vehicles. 

Characteristics:

  • Total platform length of 2015mm

  • TwinX hydraulic system

  • Extra low ramp height of 105mm

  • Mobile tire

  • 4 Powerful hydraulic cylinders

  • Foot protection incl. acoustic safety signal 

  • Start lift

  • Adjustable ramp 

  • Incl. wheel set and mounting blocks (40mm)

  • Complies with NEN-EN1493 safety standard

locking = automatic

Lifts / Crosslifts Falco Sollevatori VL35B230M 8720028103126
€ 2,964.50 Incl. VAT https://schema.org/SoldOut
€ 2,964.50 2964.5 EUR
Mobile electric battery lift table 1200kg [LT1200E] Mobile electric battery lift table 1200kg
mm mm mm Kg

Mobile scissor lift table / scissor lift / lift table / electro hydraulic scissor table lift table

The Falco LT1200E electro hydraulic battery has been specially developed for electric vehicles and is ideal for (dis)assembling engines, gearboxes, lithium-ion car battery packs and other chassis components. The lifting table is infinitely adjustable in height and length, so it has a flexible field of application.

Features:

  • The table top has 104 M10 threaded holes with a hole pattern of 100 x 100 mm for easy mounting of tools and lifting adapters 

  • Lifting table is easily adjustable in length and transverse direction and can be tilted 5 degrees

  • Swivel wheels including brake for free movement and safe operation

  • Collapsible rod for optimal workspace

  • Integrated, electro-hydraulic unit 230V

Lifting and hoisting tools / Electric lift tables Falco Sollevatori LT1200E 8720028100569
€ 2,420.00 Incl. VAT https://schema.org/SoldOut
€ 2,420.00 2420.0 EUR
Motorcycle lift professional 1000kg electric [MLP100KE] Motorcycle lift professional 1000kg electric
mm mm mm Kg

Motorcycle lift

Thanks to its unique design this Falco Sollevatori motorcycle lift is provided with the following standard features:

  • lifting height of 123cm

  • foldable plates for easy mounting and dismounting of the front and rear wheel

  • automatically locking front wheel clamp when wheel is entered

  • ramp that stores itself when lifting, because of this, the lift takes less space

  • neat built-in, powerful electric unit, provides more space on the work floor

  • handy, magnetic control unit

  • tear plate for grip on the lift

  • lift can be locked at six different heights, which ensures safety and reliability

Optional for this lift:

  • widening set, suitable for quads and ATV's, wides the lift from 80cm to 127cm

  • front extension, in combination with the widening set this lift is also suitable for trikes, extends the lift with 55cm

For more information, see related products

Motorcycle equipment / Motorcycle lifts Falco Sollevatori MLP100KE 8720028068258
€ 2,117.50 Incl. VAT https://schema.org/SoldOut
€ 2,117.50 2117.5 EUR
Motorcycle lift professional 600kg electric [MLP60KE] Motorcycle lift professional 600kg electric
mm mm mm Kg

Motorcycle lift

Thanks to its unique design this Falco Sollevatori motorcycle lift is provided with the following standard features:

  • Ultra low: Due to the external control unit, the minimum drive height is only 75mm

  • Stepless security through the 2 cylinders, no extra action is needed to lower the lift

  • Foldable back plate for easy mounting and dismounting of the rear wheel

  • Automatically locking front wheel clamp when wheel is entered

  • Ramp that stores itself when lifting, because of this, the lift takes less space

  • Equipped with a stainless steel gutter on both sides. With this, the eye nuts can be used over the entire long side

  • External 230V control unit

  • Antislip tear plate for grip on the liftt

Motorcycle equipment / Motorcycle lifts Falco Sollevatori MLP60KE 8720028087235
€ 2,541.00 Incl. VAT https://schema.org/SoldOut
€ 2,541.00 2541.0 EUR
Mounting plate 2 post lift [VL35AP] Mounting plate 2 post lift
mm mm mm Kg

Adapter plate

Suitable for the post lifts VL35F230, VL35F230B and VL35F400.

Lifts / Two post lifts Falco Sollevatori VL35AP 8720028046881
€ 411.40 Incl. VAT https://schema.org/SoldOut
€ 411.40 411.40000000000003 EUR
Rubber block 120mm [RB120] Rubber block 120mm
mm mm mm Kg

Rubber lift block / rubber block universal

Suitable for all scissor lifts.

- dimensions = 160 x 120 x 120mm

Lifts / Rubber lift pads Falco Sollevatori RB120 8720028074310
€ 19.97 Incl. VAT https://schema.org/SoldOut
€ 19.97 19.97 EUR